Table 3 Chemical Analysis of Mercury-Bearing Copper Concentrates Element Concentrate “A” Concentrate “B” Cu 26 20 Fe 26 27 S 28 38 As + Sb 0.1 4.1 Zn 0.1 5.5 Hg, ppm 200 430 The principal mineralogy of the two concentrates is shown in Table 4.
Get QuoteMay 16, 2016· Since a high-grade concentrate is desired in order to keep smelting costs as low as possible, the circuit usually comprises two stages of cleaning. In most plants flotation is carried out in mechanically agitated machines. The problem of the flotation of oxidized copper
Get QuoteApr 13, 2016· Copper Sulfide Flotation Circuit. Beneficiation of Copper Sulfide by Flotation. Copper, due to the present world demand and price, is of foremost interest to the mining industry.Many new properties are either in the process of being brought into production or are being given consideration.
Get Quoteflotation tests were unsuccessful in terms of both recovery and grade of concentrate product. The highest copper recovery of concentrate was found as 61.35% with 8.69% copper content. The concentrate with highest copper grade of 34.65% was obtained with only 26.98% copper recovery. Unsuccessful flotation of the test
Get QuoteWhat's in a concentrate? / Copper minerals (Chalcopyrite and Bornite) / Iron and silica minerals (Iron oxide, Iron sulphide, silica sand) / Trace quantities of other minerals that contain impurities. Copper . Minerals . 70%. Iron and Silica 29.98%. Minerals containing impurities . 0.02%. Element % Copper 62.3 Iron 11.2 Sulphur 26.5 Bornite
Get QuoteThis means that 95.7% of the copper present in the ore was recovered in the concentrate, while the rest was lost in the tailings. (c) The % Cu Loss can be calculated by subtracting the % Cu Recovery from 100%: % Cu Loss = 100 95.7 = 4.3% This means that 4.3% of the copper
Get Quoteprocess for processing of copper flotation concentrate in order to elevate the recovery of copper and to recover metals, which are being lost in the current technologies (Zn, Co, Mo, V). The standard treatment of copper flotation sulphide concentrates by smelting, converting and electrorefining has dominated the World copper industry.
Get QuoteJul 01, 2015· A great amount of work has been published and further research is continuously being undertaken to improve recovery and grade of gold in copper flotation circuits (Agorhom, 2014, Allan and Woodcock, 2001).Furthermore, naturally occurring elements such as fluorine, uranium and arsenic often occur in copper ores as minor or accessory elements.
Get Quote1 In the next-following selection flotation circuit copper concentrate is obtained from middlings. 2 It is also possible to include sand and slime copper circuits here. 3 Primary/secondary copper minerals ratio, nature of impregnation, pyrite content of ore, etc.
Get Quotecharacteristics, Hellyer’s sequential flotation circuit versus Cadia’s “simple” copper/gold flotation circuit. They have a common theme in that pyrite forms the principal floatable concentrate diluent. Hellyer ore contains finely disseminated chalcopyrite, sphalerite, galena, and tetrahedrite.
Get Quoteflotation tests were unsuccessful in terms of both recovery and grade of concentrate product. The highest copper recovery of concentrate was found as 61.35% with 8.69% copper content. The concentrate with highest copper grade of 34.65% was obtained with only 26.98% copper recovery. Unsuccessful flotation of the test
Get QuoteComplex concentrate A concentrate that contains multiple minerals, suitable for economic recovery, though different processing paths. Copper oxide or oxide copper: A copper mineral that contains at least one oxygen atom. Copper sulfide or sulfide copper: Copper minerals containing sulfide (S2−) as
Get QuoteWhat's in a concentrate? / Copper minerals (Chalcopyrite and Bornite) / Iron and silica minerals (Iron oxide, Iron sulphide, silica sand) / Trace quantities of other minerals that contain impurities. Copper . Minerals . 70%. Iron and Silica 29.98%. Minerals containing impurities . 0.02%. Element % Copper 62.3 Iron 11.2 Sulphur 26.5 Bornite
Get QuoteThis means that 95.7% of the copper present in the ore was recovered in the concentrate, while the rest was lost in the tailings. (c) The % Cu Loss can be calculated by subtracting the % Cu Recovery from 100%: % Cu Loss = 100 95.7 = 4.3% This means that 4.3% of the copper
Get Quote1 In the next-following selection flotation circuit copper concentrate is obtained from middlings. 2 It is also possible to include sand and slime copper circuits here. 3 Primary/secondary copper minerals ratio, nature of impregnation, pyrite content of ore, etc.
Get Quotea positive role of the pre-flotation stage on organic carbon removal using only frother as the flotation reagent. Keywords: flotation, carbonaceous matter, copper ore Introduction The copper ore located in the for-Sudetic monocline, besides copper and silver, con-tains many other valuable chemical elements. The polymetallic character of the ore
Get Quotevalues from flotation of sample C shown in Table 4 and Figure 1 indicate that the flotation efficiency of Cu, Co and S was 100% at the pH values of 8.7 and 8.8. However, the flotation efficiency at pH 8.7 was better than pH of 8.8 because of high percent values of these elements in the concentrate phase. Therefore, flotation at pH of 8.7 was more
Get Quoteflotation were determined to achieve the maximum grade and recovery of chalcopyrite and the effect of activated pyrite on the chalcopyrite flotation efficiency was investigated. 2. Materials and methods The experiments were performed on copper ore obtained from Sarcheshmeh Copper mine, Kerman, Iran.
Get QuoteConcentrate grades: o. 33-37% Copper with >93% recoveries . o. 12-15g/t Gold with >75% recoveries . o. 400-470g/t Silver with >83% recoveries • Low levels of impurities in concentrate • Principal copper mineral is chalcocite • Optimum processing route is via conventional flotation to produce a clean, high grade copper-gold-silver concentrate
Get QuoteRiver Mines routinely produce average zinc concentrate less than 10um in size,(Pease 2004). Alternatively, different flotation equipment can be added to the flowsheet such as the Jameson Cell which is well documented in the literature and proven in the field for improved fine particle flotation compared to a mechanical cell (Young 2006).
Get Quotebyproducts, tramp elements, and up to 3°/0 dissolved oxygen Copper with 0.5-2.0% dissolved oxygen and 0.05-0.2% sulfur, plus byproducts and some tramp elements Copper with 0.05-0.2% dissolved oxygen and 0.001-0.003% sulfur, plus byproducts and tramp elements Copper with less than 0.004% metallic impurities. includina sulfur 0.0058 0.2-6.0 0.2
Get Quoteflotation is used after autogenous grinding to produce copper and nickel concentrates. The plant throughput is approximately 7 Mtpa (2015) and it produces around 17 kt copper and 9 kt nickel annually, as well as, cobalt, gold, and platinum as by-products. Flotation process control is
Get QuoteConcentrate blending facility Future High As project Current High As operation Arsenic is a poisonous element found within minerals at many of the world’s copper mines. As a consequence of sulphide ore processing, arsenic is concentrated along with copper; this becomes more acute as the in-situ grade increases. The largest copper supply
Get QuoteJun 18, 2019· processes Article A Novel Technology for Separating Copper, Lead and Zinc in Flotation Concentrate by Oxidizing Roasting and Leaching Qian Zhang 1,2, Qicheng Feng 1,2,*, Shuming Wen 1,2, Chuanfa Cui 3 and Junbo Liu 1,2 1 Faculty of Land Resource Engineering, Kunming University of Science and Technology, Kunming 650093, China; [email protected] (Q.Z.); [email protected]
Get Quote